FixVault
Home › Lexus › 2012 › RX 350 AWD › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel System (Service Information) › Fuel Sender Gauge Assembly › Installation › Installation

Fuel Sender Gauge Assembly: Installation: Installation

  1. INSTALL FUEL SENDER GAUGE ASSEMBLY 
    1. Slide the fuel sender gauge to fit the claw.
      Fig 1: Fuel Sender Gauge To Fit The Claw
      GTY353464Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE 
    1. Install the fuel suction tube assembly with pump and gauge. Refer to INSTALLATION .
About FixVault