FixVault
Home › Lexus › 2016 › CT 200h Base › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Control System - Service Information › Crankshaft Position Sensor › Removal [08/2014 - ] › Procedure

Removal [08/2014 - ]: Procedure

  1. REMOVE REAR ENGINE UNDER COVER RH 
  2. REMOVE NO. 1 ENGINE UNDER COVER 
  3. REMOVE CRANK POSITION SENSOR 
    1. Disconnect the crank position sensor connector.
      GTY328864Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and crank position sensor.
      GTY331261Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault