DTC P0111: Intake Air Temperature Sensor Gradient Too High [08/2014 - ]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
5. Read the DTCs.
   RESULT
   
   

   Result	Proceed to
   DTC P0111 and other DTCs are output	A
   DTC P0111 is output	B

   HINT: 

   • If any DTCs other than P0111 are output, troubleshoot those DTCs first.
   • Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly (See article. Refer to INITIALIZATION [08/2014 - ] ).

Result:  A

A 

GO TO DTC CHART 

(See article. Refer to DIAGNOSTIC TROUBLE CODE CHART [08/2014 - 08/2015] Refer to DIAGNOSTIC TROUBLE CODE CHART [08/2015 - 06/2016] Refer to DIAGNOSTIC TROUBLE CODE CHART [06/2016 - ] )

Result:  B

B 

REPLACE MASS AIR FLOW METER SUB-ASSEMBLY 

(See article. Refer to REMOVAL [08/2014 - ] )