FixVault
Home › Lexus › 2016 › GS 350 Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 18 (Engine Control System - Service Information) › Accelerator Pedal › Installation [09/2014 - 10/2015] › Procedure

Installation [09/2014 - 10/2015]: Procedure

WARNING: This page is about a different car, the 2015 Lexus GS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY 
    NOTE:
    • Avoid physical shock to the accelerator pedal sensor assembly.
    • Do not disassemble the accelerator pedal sensor assembly.
    • This accelerator pedal does not require lubrication.

      Do not apply oil or lubricant to the accelerator pedal sensor assembly.

      If applied, the accelerator pedal sensor assembly must be replaced.

    1. Install the accelerator pedal sensor assembly with the 2 nuts.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

    2. Connect the accelerator pedal sensor connector.
  2. INSTALL ACCELERATOR PEDAL 
    1. Install the accelerator pedal with the 2 bolts.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

    2. Attach the 2 claws and install the accelerator pedal pad.
About FixVault