FixVault
Home › Lexus › 2016 › GS 350 Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 18 (Engine Control System - Service Information) › Engine Coolant Temperature Sensor › Removal [09/2014 - 10/2015] › Procedure

Removal [09/2014 - 10/2015]: Procedure

WARNING: This page is about a different car, the 2015 Lexus GS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FUEL PRESSURE SENSOR 

    (Refer to REMOVAL [09/2014 - 10/2015] )

  2. DISCONNECT WATER BY-PASS HOSE 
    1. Disconnect the water by-pass hose from the rear water by-pass joint.
      GTY404326Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE ENGINE COOLANT TEMPERATURE SENSOR 
    1. Disconnect the engine coolant temperature sensor connector.
    2. Remove the engine coolant temperature sensor and gasket.
      GTY396321Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault