Removal [09/2014 - ]: Procedure

(See article. Refer to REMOVAL [09/2014 - ] )

1. Disconnect the clamp and indoor electrical key oscillator from the No. 1 console box mounting bracket.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Disconnect the sensor connector.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

3. Remove the 3 bolts and No. 1 console box mounting bracket.

1. Remove the 2 nuts and yaw rate sensor from the No. 1 console box mounting bracket.
   NOTE:

   If the yaw rate sensor is dropped, replace it.