FixVault
Home › Lexus › 2016 › IS 300 Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (2GR-FSE) - Service Information › Knock Sensor › Removal [04/2013 - 10/2017] › Procedure

Removal [04/2013 - 10/2017]: Procedure

  1. REMOVE FUEL INJECTOR SEAL 

    Refer to REMOVAL [04/2013 - 10/2017]

  2. REMOVE KNOCK CONTROL SENSOR 
    1. Disconnect the 2 knock control sensor connectors.
      GTY471224Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Engine Front
    2. Remove the 2 bolts and 2 knock control sensors from the cylinder block sub-assembly.
About FixVault