FixVault
Home › Lexus › 2016 › LS 600h › Repair and Diagnosis › Brakes › Traction Control › Brake Control System - Service Information › Steering Angle Sensor › Installation [09/2015 - ] › Procedure

Installation [09/2015 - ]: Procedure

  1. INSTALL STEERING SENSOR 
    1. Align the pins on the spiral cable with the installation holes on the steering sensor.
      GTY679290Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *1 Pin
    2. Attach the 6 claws and install the steering sensor to the spiral cable.
  2. INSTALL SPIRAL CABLE SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 2

  3. INSTALL STEERING COLUMN COVER 

    (Refer to INSTALLATION [09/2015 - ] )

  4. INSTALL STEERING WHEEL ASSEMBLY 

    (Refer to INSTALLATION [09/2015 - ] )

  5. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL 
    NOTE:
    • Reset the AUTO TILT AWAY function setting to the previous condition by changing the customize parameter (Refer to CUSTOMIZE PARAMETERS [09/2015 - ] ).
    • When reconnecting the cable to the negative battery terminal after installing the steering sensor, check that the front tires and steering wheel are kept aligned straight ahead before and after connecting the cable to the negative battery terminal.
    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Refer to INITIALIZATION [09/2015 - ] ).
  6. INSPECT STEERING PAD 

    Refer to PROCEDURE - Step 5

  7. INSTALL BATTERY SERVICE HOLE COVER LH 

    Refer to PROCEDURE - Step 13

  8. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 14

  9. CHECK SRS WARNING LIGHT 

    (Refer to DIAGNOSIS SYSTEM [09/2015 - ] )

About FixVault