FixVault
Home › Lexus › 2016 › RC 350 Base, AWD › Repair and Diagnosis › Engine Performance › System › Engine Control System (2GR-FSE) - Service Information › Knock Sensor › Removal [09/2014 - 11/2017] › Procedure

Removal [09/2014 - 11/2017]: Procedure

  1. REMOVE FUEL INJECTOR ASSEMBLY 

    Refer to REMOVAL [09/2014 - 11/2017]

  2. REMOVE KNOCK CONTROL SENSOR 
    1. Disconnect the 2 knock control sensor connectors.
      GTY471224Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Engine Front
    2. Remove the 2 bolts and 2 knock control sensors from the cylinder block sub-assembly.
      NOTE:

      If a knock control sensor has been struck or dropped, replace it.

About FixVault