FixVault
Home › Lexus › 2017 › CT 200h Base › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Control System - Service Information › Knock Sensor › Removal [08/2014 - ] › Procedure

Removal [08/2014 - ]: Procedure

  1. REMOVE INTAKE MANIFOLD 

    (See article. Refer to PROCEDURE - Step 5 )

  2. REMOVE KNOCK SENSOR 
    1. Disconnect the knock sensor connector.
    2. Remove the bolt and knock sensor.
      GTY227208Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault