FixVault
Home › Lexus › 2017 › ES 300h › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Control System (Service Information) › Knock Sensor › Removal [07/2015 - ] › Procedure

Removal [07/2015 - ]: Procedure

  1. REMOVE INTAKE MANIFOLD 

    Refer to REMOVAL [07/2015 - ]

  2. REMOVE KNOCK CONTROL SENSOR 
    1. Disconnect the knock control sensor connector.
      GTY248846Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and knock control sensor.
About FixVault