On-Vehicle Inspection [07/2015 - ]: Procedure
- INSPECT CIRCUIT OPENING RELAY ASSEMBLY
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition 3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω If the result is not as specified, replace the circuit opening relay assembly (C/OPN).
- Measure the resistance according to the value(s) in the table below.