Inspection [07/2015 - ]: Procedure
- INSPECT THROTTLE WITH MOTOR BODY ASSEMBLY
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition 1 (M-) - 2 (M+) 20°C (68°F) 0.3 to 100 Ω TEXT IN ILLUSTRATION*a Component without harness connected
(Throttle with motor body assembly)If the result is not as specified, replace the throttle with motor body assembly.
- Measure the resistance according to the value(s) in the table below.