FixVault
Home › Lexus › 2017 › GS 200t Base › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Control System - Service Information › Knock Sensor › Removal [10/2015 - ] › Procedure

Removal [10/2015 - ]: Procedure

  1. REMOVE INTAKE MANIFOLD 

    Refer to REMOVAL [10/2015 - ]

  2. REMOVE KNOCK SENSOR 
    1. Disconnect the knock sensor connector.
      GTY506725Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and knock sensor.
About FixVault