FixVault
Home › Lexus › 2017 › GS 350 Base, RWD › Repair and Diagnosis › Engine Mechanical › Lubrication System › Engine Lubrication System (Service Information) › Oil Level Sensor › Removal [10/2015 - ] › Procedure

Removal [10/2015 - ]: Procedure

  1. REMOVE ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 10

  2. DRAIN ENGINE OIL 

    See step  1

  3. REMOVE FRONT SUSPENSION MEMBER BRACE (for 2WD) 

    Refer to PROCEDURE - Step 14

  4. REMOVE NO. 2 OIL PAN SUB-ASSEMBLY 

    See step  25

  5. REMOVE OIL WITH STRAINER PIPE SUB-ASSEMBLY (for AWD) 

    See step  26

  6. REMOVE ENGINE OIL LEVEL SENSOR 
    1. Disconnect the engine oil level sensor connector.
      GTY623879Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A for 2WD
      *B for AWD
    2. Remove the clip from the engine oil level sensor.
      GTY667934Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A for 2WD
      *B for AWD
    3. Detach the clamp and remove the 2 nuts from theengine oil level sensor.
      GTY670392Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A for 2WD
      *B for AWD
  7. REMOVE OIL LEVEL SENSOR BRACKET 
    1. Remove the oil level sensor bracket.
      GTY616621Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A for 2WD
      *B for AWD
About FixVault