FixVault
Home › Lexus › 2017 › GS 450h Base › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Control System (Service Information) › Engine Coolant Temperature Sensor › Removal [09/2014 - ] › Procedure

Removal [09/2014 - ]: Procedure

  1. REMOVE FUEL PRESSURE SENSOR 

    (See article. Refer to REMOVAL [09/2014 - ] )

  2. REMOVE ENGINE COOLANT TEMPERATURE SENSOR 
    1. Disconnect the clamp and connector.
      GTY400149Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the engine coolant temperature sensor and gasket.
      GTY400150Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault