Installation [10/2015 - ]: Procedure

HINT: 

Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

Refer to INITIALIZATION [10/2015 - ]

1. Install the mass air flow meter sub-assembly to the air cleaner cap sub-assembly with the 2 screws.
   NOTE:

   • If the mass air flow meter sub-assembly has been struck or dropped, replace it.
   • If reusing the mass air flow meter sub-assembly, be sure to inspect the O-ring.
   • Make sure that the O-ring is not cracked or does not move out of place during installation.

See step  2

See step  3

Refer to PROCEDURE - Step 98 [10/2015 - 05/2018], or Refer to PROCEDURE - Step 99 [05/2018 - ]

1. Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

   Refer to INITIALIZATION [10/2015 - ]