FixVault
Home › Lexus › 2017 › LS 460 Base, AWD › Repair and Diagnosis › Body & Frame › Windows › Windows / Glass - Service Information › Rear Power Window Switch › Inspection [09/2015 - ] › Procedure

Inspection [09/2015 - ]: Procedure

  1. INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.
      GTY629062Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      STANDARD RESISTANCE:

      Tester Connection Switch Condition Specified Condition
      2 (UP) - 5 (GND) Manual UP operation Below 1 Ω
      10 (DOWN) - 5 (GND) Manual DOWN operation Below 1 Ω
      4 (AUTO) - 5 (GND) AUTO UP / DOWN operation Below 1 Ω
      1. If the result is not as specified, replace the rear power window regulator switch assembly.
    2. Check that the LED illuminates.
    3. Apply battery voltage to the rear power window regulator switch and check that the LED illuminates.

      OK

      Measurement Condition Specified Condition
      Battery positive (+) → 8 (LED)
      Battery negative (-) → 5 (GND)      		 LED illuminates
      1. If the result is not as specified, replace the rear power window regulator switch assembly.
About FixVault