On-Vehicle Inspection [09/2015 - ]: Procedure
- INSPECT VVT RELAY (VVT RH, VVT LH)
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition 3 - 5 when no battery voltage is applied to terminals 1 and 2 10 kΩ or higher 3 - 5 when battery voltage is applied to terminals 1 and 2 Below 1 Ω If the result is not as specified, replace the VVT relay.
- Measure the resistance according to the value(s) in the table below.