FixVault
Home › Lexus › 2017 › LS 460 Base, AWD › Repair and Diagnosis › Restraints › Restraints Control Systems › Pre-Collision System - Service Information › Pre-Collision Brake Cancel Switch › Inspection [09/2015 - ] › Procedure

Inspection [09/2015 - ]: Procedure

  1. INSPECT PRE-COLLISION BRAKE CANCEL SWITCH ASSEMBLY 
    GTY289703Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Switch Condition Specified Condition
      1 (GND) - 2 (ECU) Pre-collision brake cancel switch pushed Below 1 Ω
      1 (GND) - 2 (ECU) Pre-collision brake cancel switch not pushed 10 kΩ or higher

      If the result is not as specified, replace the pre-collision brake cancel switch assembly.

About FixVault