DTC U0322-51: Software Incompatibility with Body Control Module Not Programmed [05/2019 - ]: Procedure
WARNING: This page is about a different car, the 2021 Lexus NX 300h, 2020 Lexus NX 300h, and 2019 Lexus NX 300h. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FOR DTC (HEALTH CHECK)
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Turn the Techstream on.
- Enter the following menus: System Select / Health Check.
- Check for DTCs.
OK
DTCs are not output by any system other than the front camera system (Front Recognition Camera) and dynamic radar cruise control system (Radar Cruise2).
Result
Proceed to OK NG
Result:
OK
REPLACE FORWARD RECOGNITION CAMERA. Refer to REMOVAL [05/2019 - ]
Result:
NG
GO TO DTC CHART