FixVault
Home › Lexus › 2017 › RC 300 Base › Repair and Diagnosis › Engine Performance › System › Engine Control System (2GR-FSE) - Service Information › Mass Air Flow Meter › Removal [09/2014 - 11/2017] › Procedure

Removal [09/2014 - 11/2017]: Procedure

  1. REMOVE MASS AIR FLOW METER SUB-ASSEMBLY 
    1. Disconnect the mass air flow meter sub-assembly connector.
      GTY460622Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 screws and mass air flow meter sub-assembly from the air cleaner cap sub-assembly.
      GTY412636Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      If the mass air flow meter sub-assembly has been struck or dropped, replace it.

About FixVault