FixVault
Home › Lexus › 2017 › RX 350 Base, AWD › Repair and Diagnosis › Brakes › Traction Control › Brake Control System - Service Information › Steering Angle Sensor › Removal [08/2019 - ] › Procedure

Removal [08/2019 - ]: Procedure

  1. REMOVE SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY 

    Refer to REMOVAL [08/2019 - ]

  2. REMOVE STEERING SENSOR 
    1. Disengage the 6 claws and 2 pins, and remove the steering sensor from the spiral cable sub-assembly.
      GTY323092Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Do not damage the claws and pins of the spiral cable sub-assembly.

About FixVault