FixVault
Home › Lexus › 2017 › RX 350 Base, AWD › Repair and Diagnosis › Restraints › Restraints Control Systems › Pre-Collision System Warning Buzzer - Service Information › Pre-Collision System Warning Buzzer › Removal [08/2016 - 08/2019] › Procedure

Removal [08/2016 - 08/2019]: Procedure

  1. REMOVE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY WITH MAIN BODY ECU 

    Refer to REMOVAL [08/2016 - 08/2019]

  2. REMOVE SKID CONTROL BUZZER ASSEMBLY 
    1. Using a clip remover, disengage the clamp.
      GTY653730Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the connector to remove the skid control buzzer assembly.
      NOTE:

      If the skid control buzzer assembly has been struck or dropped, replace it with a new one.

About FixVault