Installation [10/2015 - ]: Procedure

1. Engage the 2 claws to install the battery state sensor assembly to the battery current sensor holder.
2. Connect the battery state sensor assembly connector.
3. Install the battery state sensor assembly to the auxiliary battery and tighten the nut.

   Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

4. Connect the engine wire to the battery state sensor assembly with the nut.

   Torque: 7.6 N*m (77 kgf*cm, 67 in.*lbf) 

   NOTE:

   When disconnecting the engine wire, some systems need to be initialized after the engine wire is reconnected.

   Refer to INITIALIZATION [10/2015 - 08/2016] , or refer to INITIALIZATION [08/2016 - 12/2017] , or refer to INITIALIZATION [12/2017 - 03/2018] , or refer to INITIALIZATION [03/2018 - 08/2019] , or refer to INITIALIZATION [08/2019 - ]

Refer to PROCEDURE - Step 54 [10/2015 - 12/2017] , or refer to PROCEDURE - Step 53 [12/2017 - ]

Refer to PROCEDURE - Step 56 [10/2015 - 12/2017] , or refer to PROCEDURE - Step 55 [12/2017 - ]