Installation [10/2015 - ]: Procedure

1. Install the fan and generator V belt as shown in the illustration.
   Fig 1: Drive Belt Routing

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Callout	Description
   *1	Engine Water Pump Assembly
   *2	Scavenging Pump Assembly
   *3	No. 2 Idler Pulley Sub-assembly
   *4	Compressor with Pulley Assembly
   *5	Crankshaft Pulley
   *6	V-ribbed Belt Tensioner Assembly
   *7	Generator Assembly

2. Rotate the V-ribbed belt tensioner assembly counterclockwise, and then remove the 5 mm bi-hexagon wrench.

   HINT: 

   Check that the fan and generator V belt is properly set to each pulley.

3. Start the engine and check that the fan and generator V belt turns smoothly and no abnormal noise occurs.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a	Correct
   *b	Incorrect

Refer to PROCEDURE - Step 96 [10/2015 - 05/2018] or refer to PROCEDURE - Step 97 [10/2015 - 05/2018]