FixVault
Home › Lexus › 2020 › ES 350 Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (2GR-FKS) - Service Information › Knock Sensor › Removal [09/2022 - ] › Procedure

Removal [09/2022 - ]: Procedure

  1. REMOVE FUEL DELIVERY PIPE 

    Refer to REMOVAL [09/2022 - ]

  2. REMOVE KNOCK CONTROL SENSOR 
    1. Disconnect the 2 knock control sensor connectors.
      GTY644768Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A for Bank 1
      *B for Bank 2
    2. Remove the 2 bolts and 2 knock control sensors from the cylinder block sub-assembly.
      NOTE:

      If a knock control sensor has been struck or dropped, replace it.

About FixVault