FixVault
Home › Lexus › 2020 › GS F › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Control System - Service Information › Heated Oxygen Sensor › Removal [10/2015 - ] › Procedure

Removal [10/2015 - ]: Procedure

  1. REMOVE CONSOLE BOX ASSEMBLY 

    Refer to REMOVAL [10/2015 - ]

  2. REMOVE HEATED OXYGEN SENSOR (for Bank 1) 
    1. Turn back the floor carpet.
    2. Disconnect the heated oxygen sensor connector.
      GTY504677Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the clamp.
    4. Disengage the heated oxygen sensor grommet from the vehicle body.
      GTY505907Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.
      • SST: 09224-00011 
      NOTE:

      If the heated oxygen sensor has been struck or dropped, replace it.

  3. REMOVE HEATED OXYGEN SENSOR (for Bank 2) 
    1. Turn back the floor carpet.
    2. Disconnect the heated oxygen sensor connector.
      GTY519074Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the clamp.
    4. Disengage the heated oxygen sensor grommet from the vehicle body.
      GTY509929Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.
      • SST: 09224-00011 
      NOTE:

      If the heated oxygen sensor has been struck or dropped, replace it.

About FixVault