FixVault
Home › Lexus › 2021 › LC 500 2D Convertible › Repair and Diagnosis › Brakes › Traction Control › Brake Control System - Service Information (Convertible) › Steering Angle Sensor › Removal [07/2020 - 05/2023] › Procedure

Removal [07/2020 - 05/2023]: Procedure

  1. PRECAUTION 
    WARNING:

    Be sure to read precaution thoroughly before servicing.

    GTY824211Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    Refer to PRECAUTION [07/2020 - 05/2023]

    NOTE:

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal.

    Refer to PRECAUTION [07/2020 - ]

  2. REMOVE SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY 

    Refer to REMOVAL [07/2020 - 05/2023]

  3. REMOVE STEERING SENSOR 
    1. Disengage the 6 claws and 2 pins, and remove the steering sensor from the spiral cable sub-assembly.
      GTY805592Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Do not damage the claws and pins of the spiral cable sub-assembly.

About FixVault