Installation [10/2020 - 10/2023]: Procedure

1. Install the battery state sensor assembly to the battery and tighten the nut.

   Torque: 6.4 N.m (65 kgf/cm, 57 in.lbf) 

2. Connect the wire harness to the battery state sensor assembly with the nut.

   Torque: 10.2 N.m (104 kgf/cm, 8 ft.lbf) 

3. Connect the battery state sensor assembly connector.

Refer to PROCEDURE - Step 3

Refer to PROCEDURE - Step 11

Refer to WORK PROCEDURE [10/2020 - 10/2022] , or refer to WORK PROCEDURE [10/2022 - 10/2023]

HINT: 

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Refer to AUTOMATIC LEARNING CHART [10/2020 - 10/2023]