Inspection [09/2015 - ]: Procedure
- INSPECT SKID CONTROL BUZZER (PRE-COLLISION SYSTEM WARNING BUZZER)
- Apply battery voltage and check the operation of the skid control buzzer (pre-collision system warning buzzer) according to the table below.
OK
Measurement Condition Specified Condition Battery positive (+) → Terminal 2 (IG1)
Battery negative (-) → Terminal 1 (BZ)Skid control buzzer (pre-collision system warning buzzer) sounds If the result is not as specified, replace the skid control buzzer (pre-collision system warning buzzer).
TEXT IN ILLUSTRATION* a Component without harness connected
(Skid Control Buzzer (Pre-collision System Warning Buzzer))
- Apply battery voltage and check the operation of the skid control buzzer (pre-collision system warning buzzer) according to the table below.