FixVault
Home › Lexus › 2021 › RC F Fuji Speedway Edition › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - Service Information › Knock Sensor › Inspection [09/2014 - ] › Procedure

Inspection [09/2014 - ]: Procedure

  1. INSPECT KNOCK CONTROL SENSOR 
    1. Measure the resistance according to the value(s) in the table below.
      GTY520155Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Knock Control Sensor)

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 120 to 280 kΩ

      If the result is not as specified, replace the knock control sensor.

About FixVault