Engine Oil Replacement Reminder Reset - Procedure 09

To reset MAINT reminder light after engine oil change:

1. Switch the power source to IG-ON. Then use the TRIP switch to turn ON the TRIP A display on the multi-information display.
2. Switch the power source to OFF.
3. While pushing the RESET button, switch the power source to IG-ON.
4. Keep holding the RESET switch (for at least five seconds) while the multi-information display counts down.
5. When the reset operation is complete, the multi-information display will display "COMPLETE". Release the RESET switch. After 6 seconds, the "COMPLETE" display will turn OFF.