FixVault
Home › Lexus › 2021 › UX 200 Base › Repair and Diagnosis › Engine Performance › System › Engine Control System (M20A-FKS) (Service Information) › Knock Sensor › Inspection [10/2018 - 07/2022] › Procedure

Inspection [10/2018 - 07/2022]: Procedure

  1. INSPECT KNOCK SENSOR 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 25°C (77°F) 120 to 280 kΩ

      If the result is not as specified, replace the knock sensor.

      GTY740839Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Knock Sensor)
About FixVault