Installation [12/2021 - ]: Procedure

INSTALL THROTTLE WITH THROTTLE POSITION SENSOR BODY ASSEMBLY
INSTALL INTERCOOLER ASSEMBLY
Refer to INSTALLATION [12/2021 - ]
ADD ENGINE COOLANT
Refer to PROCEDURE - Step 3
INSPECT FOR COOLANT LEAK
Refer to PROCEDURE - Step 3
PERFORM INITIALIZATION
1. Perform "Inspection After Repair" after replacing the throttle with throttle position sensor body assembly.
  - w/ Canister Pump Module: Refer to INITIALIZATION [12/2021 - ]
  - w/o Canister Pump Module: Refer to INITIALIZATION [12/2021 - ]