FixVault
Home › Lexus › 2023 › ES 250 Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (A25A-FKS) - Service Information › Knock Sensor › Removal [09/2022 - ] › Procedure

Removal [09/2022 - ]: Procedure

  1. REMOVE GENERATOR ASSEMBLY 

    Refer to REMOVAL [09/2022 - ]

  2. REMOVE KNOCK CONTROL SENSOR 
    1. Disconnect the knock control sensor connector.
      GTY754296Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and knock control sensor from the cylinder block sub-assembly.
      NOTE:

      If the knock control sensor has been struck or dropped, replace it.

About FixVault