FixVault
Home › Lexus › 2023 › LX 600 Base › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt - Service Information › Occupant Detection Sensor › Installation [12/2021 - ] › Procedure

Installation [12/2021 - ]: Procedure

  1. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY RH 
  2. INSTALL FRONT SEAT CUSHION PAD RH (OCCUPANT DETECTION SENSOR) 
    NOTE:

    Be careful not to dirty or damage the front seat cushion cover sub-assembly RH and the front seat cushion pad RH (occupant detection sensor).

    HINT: When installing a front seat cushion cover sub-assembly RH, refer to Precaution in order to prevent wrinkles from forming.Refer to PRECAUTION [12/2021 - ]
  3. INSTALL FRONT SEAT CUSHION COVER WITH PAD RH 
  4. INSTALL FRONT SEATBACK ASSEMBLY RH 

    Torque: 42 N.m (428 kgf/cm, 31 ft.lbf) 

  5. INSTALL WIRING HARNESS SUPPORT 
  6. INSTALL FRONT SEAT INNER CUSHION SHIELD RH 
  7. INSTALL FRONT SEAT CUSHION SHIELD RH 
  8. INSTALL FRONT SEAT FRONT CUSHION SHIELD RH 
  9. INSTALL FRONT SEAT ASSEMBLY RH 
    1. w/o Folding Headrest:

      Use the same procedure described for the driver side.

      Refer to INSTALLATION [12/2021 - ]

    2. w/ Folding Headrest:

      Refer to INSTALLATION [12/2021 - ]

About FixVault