Installation [05/2023 - ]: Procedure
- INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY (FUEL PRESSURE SENSOR)
HINT:
Perform "Inspection After Repair" after replacing the fuel delivery pipe sub-assembly (fuel pressure sensor).
Refer to INITIALIZATION [04/2020 - ]
Refer to INSTALLATION [05/2023 - ]
NOTE:- Do not remove the fuel pressure sensor from the fuel delivery pipe sub-assembly.
- If the fuel pressure sensor is removed, replace the fuel delivery pipe sub-assembly (fuel pressure sensor) with a new one.
- CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Refer to INSTALLATION [05/2023 - ]
- INSPECT FOR FUEL LEAK
Refer to PROCEDURE - Step 1
- INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
HINT:
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.