FixVault
Home › Lexus › 2025 › NX 350 Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - Service Information › Camshaft Oil Control Valve › On-Vehicle Inspection [11/2021 - ] › Procedure

On-Vehicle Inspection [11/2021 - ]: Procedure

  1. REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY 

    Refer to REMOVAL [11/2021 - ] 

  2. INSPECT INTAKE CAMSHAFT TIMING GEAR BOLT ASSEMBLY 
    1. Check the stroke of the plunger in the center of the intake camshaft timing gear bolt assembly.

      Standard Stroke

      2.2 mm (0.0866 in.) or more

      If the result is not as specified, replace the intake camshaft timing gear bolt assembly.

      GTY1077537Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Plunger
  3. INSPECT EXHAUST CAMSHAFT TIMING GEAR BOLT ASSEMBLY 
    1. Check the stroke of the plunger in the center of the exhaust camshaft timing gear bolt assembly.

      Standard Stroke

      2.2 mm (0.0866 in.) or more

      If the result is not as specified, replace the exhaust camshaft timing gear bolt assembly.

      GTY1076191Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Plunger
  4. INSTALL CAM TIMING OIL CONTROL SOLENOID ASSEMBLY 

    Refer to INSTALLATION [11/2021 - ] 

About FixVault