FixVault
Home › Lincoln › 1988 › Mark VII LSC › Repair and Diagnosis › Steering › Steering Column › Overhaul › Shift Lever (Column Shift) › Reassembly

Shift Lever (Column Shift): Reassembly

  1. Install lower selector tube support bracket with bushing on lower selector tube. Install 2 new anti-rattle clips in grooves on upper selector tube, with both clips facing in same direction.
  2. Grease lower 6" of upper selector tube. Place lower selector tube in vise. Aligning marks made during disassembly, install upper tube on lower tube.
  3. Install new bearing in detent plate. Align and attach lower support bracket to steering column. Install "C" clip retainer and washer. Install shift lever spring and plunger assembly.
  4. Install plastic selector cover loosely on shift lever. Install new roll pin. Check shift lever assembly for smooth, rotational movement.
  5. Grease selector lever, plunger, spring and detent plate. Install wiper switch. Install steering column. Check shift lever play. See ADJUSTMENTS  in this article.
About FixVault