Quick Test C2: Steering Wheel Rotation Sensor Check
- Turn ignition off. Disconnect EVO control module 14-pin harness connector. Examine wiring harness for damage. Verify the following wires correspond to these pin numbers:
- Red/Yellow wire (circuit No. 834) in pin No. 18
- Red/White wire (circuit No. 835) in pin No. 19
- Black wire (circuit No. 57) in pin No. 6
- If damaged or crossed wires are found, repair harness and proceed to QUICK TEST A1 . If wires are okay, proceed to QUICK TEST C3 .