Side Mirror Motor
Remove door trim panel. Disconnect mirror motor connector from mirror switch harness. Using 2 jumper wires, connect battery voltage and chassis ground to specified wire terminals. See Fig 1 . See SIDE MIRROR MOTOR TEST TABLE . Observe mirror for proper movement. If mirror motor fails any portion of test, replace mirror assembly.
SIDE MIRROR MOTOR TEST
| Mirror Movement | Battery Voltage | Ground | |
|---|---|---|---|
| Left Mirror | |||
| Up | DK BLU | YEL/LT BLU | |
| Down | YEL/LT BLU | DK BLU | |
| Left | RED | YEL/RED | |
| Right | YEL/RED | RED | |
| Right Mirror | |||
| Up | PPL | WHT/PPL | |
| Down | WHT/PPL | PPL | |
| Left | DK GRN | WHT/LT GRN | |
| Right | WHT/LT GRN | DK GRN | |