Side Mirror Switch
Using an ohmmeter, check for continuity between indicated switch connector terminals when switch is activated as specified. See the POWER MIRROR SWITCH CONTINUITY TEST TABLE . See Fig 1 . Replace switch if it does not test as specified.
POWER MIRROR SWITCH CONTINUITY TEST
| Switch Position | Continuity Between Pins No. | |
|---|---|---|
| Left Mirror | ||
| Up | 1 & 3 | |
| Down | 1 & 6 | |
| Left | 1 & 4 | |
| Right | 1 & 6 | |
| Right Mirror | ||
| Up | 1 & 7 | |
| Down | 1 & 6 | |
| Left | 1 & 8 | |
| Right | 1 & 6 | |