EVO Control Module: Removal

1. Turn the ignition switch to the OFF or LOCK position.
2. Turn the air suspension switch (located in luggage compartment) OFF. See Fig 1 .
3. Remove the glove compartment.
4. Disconnect the wire harness from the EVO control module. See Fig 2 .
5. Remove the module-to-cowl retaining bolt, and remove the module. See Fig 3 .

Fig 1: Locating Air Suspension Switch

Courtesy of FORD MOTOR CO.

Fig 2: Identifying EVO Control Module Wire Harness

Courtesy of FORD MOTOR CO.

Fig 3: Identifying Control Module-to-Cowl Retaining Bolt

Courtesy of FORD MOTOR CO.