FixVault
Home › Lincoln › 2000 › Continental › Repair and Diagnosis › External Pages › Different car › Section 249 (Brake System-General Information) › Diagnosis And Testing › Brake System › Inspection and Verification › Adjustable Pedals

Adjustable Pedals

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern.
  2. Visually inspect for obvious signs of mechanical or electrical damage. Refer to the following chart:

    Visual Inspection Chart 

    VISUAL INSPECTION CHART

    Mechanical Electrical
    • Adjustable pedals
    • Adjustable pedal motor and cables
    • Adjustable pedal switch
    • Central junction box (CJB) fuse 30 (10A)
    • Wiring harness
    • Circuitry
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  4. If the diagnostic tool does not power up, refer to the diagnostic tool manual .
  5. Carry out the diagnostic tool data link test. If the diagnostic tool responds with:
    • SCP, UBP, CAN or ISO circuit faults; all electronic control units no response/not equipped, refer to MODULE COMMUNICATIONS NETWORK .
    • No response/not equipped for front electronic module (FEM), refer to MULTIFUNCTION ELECTRONIC MODULES .
    • System passed, retrieve and record the continuous DTCs and the carry out self-test diagnostics for the FEM.
  6. If the DTCs retrieved are related to the concern, go to the FRONT ELECTRONIC MODULE (FEM) DIAGNOSTIC TROUBLE CODE (DTC) INDEX .
  7. If no DTCs related to the concern are retrieved, GO to SYMPTOM CHART .
About FixVault