Removal and Installation

WARNING: This page is about a different car, the 2004 Lincoln Navigator and 2004 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the battery ground cable.
Disconnect the powertrain control module (PCM) electrical connectors.

Fig 1: Disconnecting Powertrain Control Module (PCM) Electrical Connectors
Courtesy of FORD MOTOR CO.
Remove the bolts and the PCM.

Fig 2: Removing Bolts And PCM
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.