Anti-Lock Control
WARNING: This page is about a different car, the 2003 Lincoln Navigator and 2003 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
The four wheel anti-lock brake system (4WABS) with traction control and stability assist system consists of the following components:
- active brake booster with integral solenoid
- brake booster release switch
- front anti-lock brake sensors
- front anti-lock brake sensor indicators
- hydraulic control unit (HCU)
- stability assist event indicator
- stability assist module
- lateral accelerometer
- rear anti-lock brake sensors
- rear anti-lock brake sensor indicators
- steering wheel position sensor
- two brake pressure transducers
- Advance Trac®/stability assist switch
- yaw rate sensor
- yellow anti-lock brake warning indicator
For removal and installation of the brake booster release switch, refer to POWER BRAKE ACTUATION .
For removal and installation of the front anti-lock brake sensor indicators, refer to FRONT - 2WD COIL SPRING or FRONT - 4WD COIL SPRING for 4x4 vehicles.
For removal and installation of the rear anti-lock brake sensor indicator, refer to DRIVELINE SYSTEM-GENERAL INFORMATION .
For removal and installation of the steering wheel position sensor, refer to STEERING COLUMN .