Park System: Installation

WARNING: This page is about a different car, the 2003 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If a new park gear needs to be installed, refer to OUTPUT SHAFT - CHECK .

Install the park pawl shaft.
1. Install the park pawl shaft.
2. Install the park pawl.
3. Install the park pawl return spring.
  
  Fig 1: Installing Park Pawl Shaft
  Courtesy of FORD MOTOR CO.
Install the parking rod guide plate.
1. Install the parking rod guide plate.
2. Install the bolts.
  
  Fig 2: Installing Parking Rod Guide Plate
  Courtesy of FORD MOTOR CO.
Install the extension housing gasket and the extension housing. For additional information, refer to EXTENSION HOUSING GASKET - 4X2 or EXTENSION HOUSING GASKET - 4X4 .