Section 527 (Anti-Lock Control-Traction Control & Stability Assist)
WARNING: This page is about a different car, the 2004 Lincoln Navigator and 2004 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Description And Operation
- Diagnosis And Testing
- Anti-Lock Control
- Notes
- Special Tool(s)
- Principles of Operation
- Sensor Cluster
- Lateral Accelerometer
- Longitudinal Accelerometer (4x4 vehicles)
- Steering Wheel Rotation Sensor
- Active Brake Booster
- Electronic Brake Distribution
- Brake Assist Braking
- DTC C1963
- Anti-Lock Brake System (ABS) Module Calibration
- Inspection and Verification
- Anti-Lock Brake System (ABS) Module Diagnostic Trouble Code (DTC) Index
- ABS Module Calibration List
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: No Communication With The Abs Module
- Pinpoint Test B: DTC B1483 - Brake Pedal Input Circuit Failure
- Pinpoint Test C: DTC B1676 - Battery Pack Voltage Out Of Range
- Pinpoint Test D: DTC C1095 - Abs Hydraulic Pump Motor Circuit Failure
- Pinpoint Test E: DTC C1145 (RF), DTC C1155 (LF), DTC C1165 (RR), DTC C1175 (LR) - Wheel Speed Sensor Input Circuit Failure
- Pinpoint Test F: DTC C1233, DTC C1234, DTC C1235, DTC C1236 - Wheel Speed Sensor Input Signal Missing
- Pinpoint Test G: DTC C1277 And C1278 - Steering Wheel Angle 1 And 2 Circuit Failure/Faulted
- Pinpoint Test H: DTC C1279, C1280, C1281, C1282, C2769, C2770, C2777, C2778 - Sensor Cluster Fault
- Pinpoint Test I: DTC C1285 - Booster Solenoid Circuit Failure
- Pinpoint Test J: DTC C1287 - Brake Booster Pedal Force Switch Circuit Failure
- Pinpoint Test K: DTC C1288 And C1440 Brake Pressure Transducer Input Circuit Failure/Faulted
- Pinpoint Test L: DTC C1730 - Reference Voltage Out Of Range (+5 V)
- Pinpoint Test M: DTC C1960 - Driver Brake Apply Circuit Fault
- Pinpoint Test N: DTC B2734, B2736, B2737, B2738, B2740 - Pedal Travel Sensor Fault
- Pinpoint Test O: The Stability Assist Cannot Be Disabled
- Pinpoint Test P: DTC C1998 Module Calibration Not Complete
- Pinpoint Test Q: Advance TRAC® Switch Indicator Is Always On/Cannot Be Disabled
- Anti-Lock Control
- Removal And Installation