Mirror Control Switch
Remove mirror control switch. Check continuity between appropriate mirror control switch terminals with switch in appropriate position. See MIRROR CONTROL SWITCH TERMINAL IDENTIFICATION table. See Fig 1 . If continuity is not as specified, replace mirror control switch.
MIRROR CONTROL SWITCH TERMINAL IDENTIFICATION
| Switch Position | Continuity Between Terminals No. | |
|---|---|---|
| Left Mirror | ||
| Up | 3 & 9; 4 & 7 | |
| Down | 3 & 4; 7 & 9 | |
| Left | 1 & 3; 4 & 7 | |
| Right | 1 & 7; 3 & 4 | |
| Right Mirror | ||
| Up | 3 & 8; 4 & 7 | |
| Down | 3 & 4; 7 & 8 | |
| Left | 2 & 3; 4 & 7 | |
| Right | 2 & 7; 3 & 4 | |